News For This Month:

Some Common Plumbing Problems

Once in a while, homeowners encounter plumbing problems. You will find many types of plumbing problems. Here are some of the most common ones. Some DIY solutions are given after finding out how to identify these problems.

Many times our drains get clogged. If your drains are clear, then water will not collect in the sink or tub but simply passes quickly. IF the water does not drain, then your drains are clogged. Soap and hair are sometimes the cause of clogged drains. One way you can attempt to clear the clog is by pouring hot water into the drain to dissolve soap. Use a drain snake or a wire coat hanger if there are solid objects in your drain.

Using chemical drain cleaners can damage your plumbing. The reason is that they contain lye which reacts with water with heat. If you use chemical drain cleaners, it can burn or damage your drains. Call a professional plumbing service and repair if it does not solve your clogged drains.

Toilet backup is another common plumbing problems that you can encounter. The blockage can be cleared with the use of a toilet plunger. IF the blockage is not removed, try flushing the toilet with a bucket of hot, soapy water from waist height. It is either the toilet will flush from the force of the water or the bowl will simply fill and not flush. After pouting 2 to 3 buckets of water, your problem may be solved.

A leaking faucet is not only annoying but it will also increase your water bill. Leak drips from the mouth of the faucet but it actually comes from the handle. You need to determine which handle is responsible if you have a double handle sink hardware. To find out which handle is leaking, turn the hot and cold valves off one at a time.

When you find which handle is leaking, remove the parts. You need to clean the pieces and replace the cartridges and o-rings as necessary. If you clean the parts, then your handle will have a proper seal. There is nothing to be replaced.

if there is low water pressure, then it will take a lot of time to wash dishes. You need to clean your aerator when this happens. There is a slowing down of pressure if minerals and sediments build up. It is important to check if there is rust in your aerator. It is important to replace the rusted parts. Clean your aerator using a brush or soaking overnight in white vinegar. When you place it back, it should be tight.

If you have tried everything but your plumbing problem persists, then you should call in your professional plumber to solve the problem.

plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair